TGR E

Pressurised electric water heaters
  • Volumes: 30, 50, 80, 100, 120 l.
  • Vertical wall mounting
  • Electric immersion heating element.
  • Compact sizes suitable for small rooms.
  • Tank made of high quality steel sheet, enamel coated at 850°C.
  • Magnesium anode for additional anti-corrosion protection of tank.
  • Insulated version of heating flange prevents unnecessary consumption of magnesium anode at the surface of immersion heating element (long life of anode).
  • Simple installation and maintance.

Electronic thermoregulator with a control knob

  • Temperature regulation range 10˚C to 75˚C.
  • Mg anode consumption measurement.
  • 2-colour LED diode in control knob axis:
    • indication of electric heating element operation
    • indication of Mg anode operation.
  • Temperature setting options:
    • freeze protection (10°C)
    • 35°C setting
    • economical temperature (55°C)
    • maximum temperature (75°C)
    • manual setting up to 75°C

Electric immersion heating element

The immersion heater is in direct contact with water. It is made of copper, providing high corrosion resistance and long life. The Mg anode additionally protects the enamelled tank against corrosion.

Features

MODEL TGR E 50 TGR E 80 TGR E 100
Volume [l] 50 80 100
Purpose      
One or more outlets • • •
Vertical wall mounting • • •
Number of persons - average consumption 2 3 - 4 4 - 5
Dimensions of Connections      
A (mm) 690 950 1125
B (mm) 470 735 900
C (mm) 250 245 225
Connections to the supply network G 1/2 G 1/2 G 1/2
Net/ gross weight /with water [kg] 24/26/74 31/33/111 36/38/136
Technical Characteristics      
Working pressure [bar] 6 6 6
Enamelled steel tank • • •
Magnesium protective anode • • •
Selection of temperatures to 75 °C • • •
Zaščita proti zmrzovanju • • •
Heating element control lamp • • •
Thermometer • • •
Average thickness of insulation [mm] 20 - 60 20 - 60 20 - 60
Degree of protection against humidity IP 24 IP 24 IP 24
Electrical Characteristics      
Rated power output [W] 2000 2000 2000
Voltage 230 V ~ • • •
Nominal current [A] 8,7 8,7 8,7
Functional Characteristics      
Heating time from 15 to 75 °C 1h 55min 3h 05min 3h 55min
Amount of available mixed water at 40 °C [l]¹ 89 145 200
Thermal losses [kWh per 24 h]² 0,94 1,30 1,54
Transportation      
Packaging dimensions [mm] 480 x490x810 480x490x1070 480x490x1245
No. of pieces per truck [120 m³] 480 320 320
(1) Values are valid for mixing water with temperature of 15 °C from the cold inlet with water at 65 °C from the heater (standard SIST EN 60379:2005).
(2) Measured at 20 °C ambient temperature, and 65 °C water temperature in the heater (standard SIST EN 60379:2005).