Pressurised electric water heaters
- Volumes: 30, 50, 80, 100, 120, 150, 200 l.
- Vertical wall mounting.
- Compact dimensions (space savings).
- Original angular shape.
- Tank made of high quality steel sheet, enamel coated at 850°C.
- Mg anode for additional anti-corrosion protection of the tank.
- High quality insulation assures lower heat loss.
- Electric immersion heating element.
- Arbitrary water temperature setting of up to 75°C.
- Bimetal thermometer.
- Indicator of electric heating element operation.
- Temperature setting options:
- economical temperature
- protection against freezing.
- Simple installation and maintenance.
Electric immersion heating element
The immersion heater is in direct contact with water. It is made of copper, providing high corrosion resistance and long life. The Mg anode additionally protects the enamelled tank against corrosion. Properties
| Volume [l] |
50 |
80 |
100 |
| Purpose |
|
|
|
| One or more outlets |
• |
• |
• |
| Vertical wall mounting |
• |
• |
• |
| Number of persons - average consumption |
2 |
3 - 4 |
4 - 5 |
| Dimensions of Connections |
|
|
|
| A (mm) |
690 |
950 |
1125 |
| B (mm) |
470 |
735 |
900 |
| C (mm) |
250 |
245 |
225 |
| Connections to the supply network |
G 1/2 |
G 1/2 |
G 1/2 |
| Net / gross weight / with water (kg) |
24/26/74 |
31/33/111 |
36/38/136 |
| Technical Characteristics |
|
|
|
| Working pressure [bar] |
6 |
6 |
6 |
| Enamelled steel tank |
• |
• |
• |
| Magnesium protective anode |
• |
• |
• |
| Continuous temperature selection to 75 °C |
• |
• |
• |
| Protection against freezing |
• |
• |
• |
| Heating element control lamp |
• |
• |
• |
| Thermometer |
• |
• |
• |
| Average thickness of insulation [mm] |
20 - 60 |
20 - 60 |
20 - 60 |
| Degree of protection against humidity |
IP 24 |
IP 24 |
IP 24 |
| Electrical Characteristics |
|
|
|
| Rated power output [W] |
2000 |
2000 |
2000 |
| Voltage 230 V ~ |
• |
• |
• |
| Nominal current [A] |
8,7 |
8,7 |
8,7 |
| Functional Characteristics |
|
|
|
| Heating time from 15 to 75 °C |
1h 55min |
3h 05min |
3h 55min |
| Amount of available mixed water at 40 °C [l]¹ |
89 |
145 |
200 |
| Thermal losses [kWh/ 24 h]² |
0,94 |
1,30 |
1,54 |
| Connection Fittings |
|
|
|
| Safety valve or safety group |
|
|
|
| Reduction valve for pressure > 5 bar |
|
|
|
| Transportation |
|
|
|
| Packaging dimensions [mm] |
480 x490x810 |
480x490x1070 |
480x490x1245 |
| No. of pieces per truck (120 m³) |
480 |
320 |
320 |
(1) Values are valid for mixing water with temperature of 15 °C from the cold inlet with water at 65 °C from the heater (standard SIST EN 60379:2005).
(2) Measured at 20 °C ambient temperature, and 65 °C water temperature in the heater (standard SIST EN 60379:2005).
| 
