Storage tanks

Volumes: 200, 300, 400, 500 l.
Hot water storage tank with one or two tubular heat exchangers.
Upright floor version.
Tank made of high quality steel sheet, enamel coated at 850 °C.
Mg anode for additional anticorrosion protection of the tank.
Bimetal thermometer displaying water temperature.
High quality heat insulation - lower heat loss.
Option of additional installation of electric heating element on side flange or in connecting bushing 6/4”.
Option of additional installation of heat pump on side-flange.
Coating colour of your choice (red, blue or grey).

MODEL	KGV 200-1	KGV 300-1	KGV 300-2
Volume (l)	200	285	280
Dimensions of Connections
Total height (mm)	1150	1550	1550
Outside diameter (mm)	650	650	650
Connections to the supply network	G 1	G 1	G 1
Net / gross weight (kg)	82/90/282	112/120/397	134/142/417
Technical Characteristics
Enamelled steel tank	•	•	•
Magnesium protective anode	•	•	•
Average thickness of insulation (mm)	57	57	57
Degree of protection against humidity	IP 21	IP 21	IP 21
Connecting bushing G 6/4	•	•	•
Side flange 180 mm	•	•	•
Heat Exchanger below
Dimensions of connections	G 1	G 1	G 1
Exchanger area (m²)	0,85	1,45	1,45
Volume (l)	5,3	9,1	9,1
Heat Exchanger above
Dimensions of connections	-	-	G 1
Exchanger area (m²)	-	-	0,90
Volume (l)	-	-	5,7
Working pressure
Water reservoir (bar)	6	6	6
Heat exchanger (bar)	12	12	12
Max. Temperature
Water reservoir (°C)	85	85	85
Heat exchanger (°C)	25	25	25
Option
Instalation of an electrical heater to the connecting bushing	•	•	•
Instalation of an electrical heater on the side flange	•	•	•
Installation of a heat pump	•	•	•
Transportation Data
Packaging dimensions (mm)	750 x 750 x 1350	750 x 750 x 1750	750x750x1700
No. of pieces per truck (120 m³)	60	60	60